测氧仪/船工业氧气检测仪/氧气测试仪PurgEye 300 Nano /APIO 300N Purpose-designed Purge Monitor概述:
The
Argweld® PurgEye® 300 'Nano' Weld Purge Monitor® has been
specifically designed as a very low cost, basic entry level version of the
Argweld® PurgEye® 300 for indicating low oxygen levels in inert gas for weld
purging down to 10 ppm.
With a large
alpha-numeric display, the Argweld® PurgEye® 300 'Nano' measures very
accurately from 1000 ppm down to 10 ppm.
The Argweld®
PurgEye® 300 'Nano' uses a unique new low cost long life sensor which has very
little maintenance requirement and avoids the disadvantages of monitors with
'wet cell' technology that have to be constantly calibrated and have sensors
replaced.
Argweld® PurgEye®
300 'Nano' Weld Purge Monitors® are available for immediate delivery.
测氧仪/船工业氧气检测仪/氧气测试仪PurgEye 300 Nano /APIO 300N特征描述:
Small, Lightweight
and Inexpensive
The
Argweld PurgEye® 300 Nano Weld Purge Monitor® is small, lightweight
and inexpensive.
The PurgEye®
300 Nano is equipped with an integrally mounted sensor to eliminate
electrical interference.
The PurgEye®
300 Nano is specifically developed for weld purging of critical stainless
steel and titanium joints and others where data logging, alarms and welder
control are not necessarily required.
The PurgEye®
300 Nano is perfect for operation with manual welding, orbital welders,
welding enclosures, pipe welding, chamber welding, duplex steel and titanium
welding and ideal for welding stainless steel in ultra clean applications.
The PurgEye®
300 Nano has secure 'leak tight' connectors for weld purge hoses. Also,
the instrument can be used with optional accessory hand pump and gas sampling
probe.
The PurgEye®
300 Nano has low repair, refurbishment and re-calibration costs. There is
no pump needed and hence there are no moving parts to fail.
测氧仪/船工业氧气检测仪/氧气测试仪PurgEye 300 Nano /APIO 300N基本技术规格:
Technical Data and
Specification
The PurgEye®
300 Nano has an operating voltage of AC 115/230 V single phase 50/60Hz.
The unit uses an external 12 V Power Supply Unit with an input voltage range of
AC 90 to 260 V (included).
The PurgEye®
300 Nano has a large alpha-numeric display.
Display readings
can only be shown in ppm.
The PurgEye®
300 Nano has a warm up time of less than 60 seconds.
Argweld® PurgEye®
300 Nano Weld Purge Monitor® Accuracy Range
Measuring Range:
|
1,000 ppm down to
10 ppm
|
Accuracy:
|
±2.0% of scale
reading
|
Size:
|
145 x 190 x 70 mm
|
Power
Consumption:
|
18 W
|
Operating
Voltage:
|
AC 115/230 V
single phase 50/60 Hz
|
Weight:
|
1.5 kg
|
测氧仪/船工业氧气检测仪/氧气测试仪PurgEye 300 Nano /APIO 300N其他参数规格:
Shipping
Information, Weights and Dimensions
Product Codes and
Sizes
Dimensions 145 x
190 x 70 mm
Gross weight 2.0 kg
Nett weight 1.5 kg
Volumetric weight 2.1 kg
Actual Instrument
dimensions 145 x 190 x 70 mm
Actual Instrument weight 1.5 kg
Storage carry case
dimensions 377 x 322 x 95 mm
as a warm up time of less than 60 seconds.
测氧仪/船工业氧气检测仪/氧气测试仪PurgEye 300 Nano /APIO 300NSupplied with:
External 12 V Power
Supply Unit (including multiple international mains adaptor connections)
Sample tube set (40 cm red tubing and 1 metre green tubing)
User instruction booklet
Storage and presentation case
Calibration Certificate for the purpose of Quality Control Procedures and
Management Systems
测氧仪/船工业氧气检测仪/氧气测试仪PurgEye 300 Nano /APIO 300N操作步骤:
接通电源插头即为开机。
待显示器中显示为1000并闪烁时(大约10分钟左右),表示机器已经热机完成,可以使用。
分别把探针头及排气管插入机器的2个孔中。(上下孔没有规定顺序)。
把探针头插入带检测管道的焊缝中即可检测。
电源插头拔掉即为关机。
更多氧气测试仪PurgEye 300 Nano /APIO 300N相关信息请联系我们。
其他检测仪器:高温耦合剂、铁素体含量检测仪。