測氧儀/船工業氧氣檢測儀/氧氣測試儀PurgEye 300 Nano /APIO 300N Purpose-designed Purge Monitor概述：
The
Argweld® PurgEye® 300 'Nano' Weld Purge Monitor® has been
specifically designed as a very low cost, basic entry level version of the
Argweld® PurgEye® 300 for indicating low oxygen levels in inert gas for weld
purging down to 10 ppm.
With a large
alpha-numeric display, the Argweld® PurgEye® 300 'Nano' measures very
accurately from 1000 ppm down to 10 ppm.
The Argweld®
PurgEye® 300 'Nano' uses a unique new low cost long life sensor which has very
little maintenance requirement and avoids the disadvantages of monitors with
'wet cell' technology that have to be constantly calibrated and have sensors
replaced.
Argweld® PurgEye®
300 'Nano' Weld Purge Monitors® are available for immediate delivery.
測氧儀/船工業氧氣檢測儀/氧氣測試儀PurgEye 300 Nano /APIO 300N特征描述：
Small, Lightweight
and Inexpensive
The
Argweld PurgEye® 300 Nano Weld Purge Monitor® is small, lightweight
and inexpensive.
The PurgEye®
300 Nano is equipped with an integrally mounted sensor to eliminate
electrical interference.
The PurgEye®
300 Nano is specifically developed for weld purging of critical stainless
steel and titanium joints and others where data logging, alarms and welder
control are not necessarily required.
The PurgEye®
300 Nano is perfect for operation with manual welding, orbital welders,
welding enclosures, pipe welding, chamber welding, duplex steel and titanium
welding and ideal for welding stainless steel in ultra clean applications.
The PurgEye®
300 Nano has secure 'leak tight' connectors for weld purge hoses. Also,
the instrument can be used with optional accessory hand pump and gas sampling
probe.
The PurgEye®
300 Nano has low repair, refurbishment and re-calibration costs. There is
no pump needed and hence there are no moving parts to fail.
測氧儀/船工業氧氣檢測儀/氧氣測試儀PurgEye 300 Nano /APIO 300N基本技術規格：
Technical Data and
Specification
The PurgEye®
300 Nano has an operating voltage of AC 115/230 V single phase 50/60Hz.
The unit uses an external 12 V Power Supply Unit with an input voltage range of
AC 90 to 260 V (included).
The PurgEye®
300 Nano has a large alpha-numeric display.
Display readings
can only be shown in ppm.
The PurgEye®
300 Nano has a warm up time of less than 60 seconds.
Argweld® PurgEye®
300 Nano Weld Purge Monitor® Accuracy Range
|
Measuring Range:
|
1,000 ppm down to
10 ppm
|
|
Accuracy:
|
±2.0% of scale
reading
|
|
Size:
|
145 x 190 x 70 mm
|
|
Power
Consumption:
|
18 W
|
|
Operating
Voltage:
|
AC 115/230 V
single phase 50/60 Hz
|
|
Weight:
|
1.5 kg
|
測氧儀/船工業氧氣檢測儀/氧氣測試儀PurgEye 300 Nano /APIO 300N其他參數規格：
Shipping
Information, Weights and Dimensions
Product Codes and
Sizes
Dimensions 145 x
190 x 70 mm
Gross weight 2.0 kg
Nett weight 1.5 kg
Volumetric weight 2.1 kg
Actual Instrument
dimensions 145 x 190 x 70 mm
Actual Instrument weight 1.5 kg
Storage carry case
dimensions 377 x 322 x 95 mm
as a warm up time of less than 60 seconds.
測氧儀/船工業氧氣檢測儀/氧氣測試儀PurgEye 300 Nano /APIO 300NSupplied with:
External 12 V Power
Supply Unit (including multiple international mains adaptor connections)
Sample tube set (40 cm red tubing and 1 metre green tubing)
User instruction booklet
Storage and presentation case
Calibration Certificate for the purpose of Quality Control Procedures and
Management Systems
測氧儀/船工業氧氣檢測儀/氧氣測試儀PurgEye 300 Nano /APIO 300N操作步驟：
接通電源插頭即為開機。
待顯示器中顯示為1000并閃爍時（大約10分鐘左右），表示機器已經熱機完成，可以使用。
分別把探針頭及排氣管插入機器的2個孔中。（上下孔沒有規定順序）。
把探針頭插入帶檢測管道的焊縫中即可檢測。
電源插頭拔掉即為關機。
更多氧氣測試儀PurgEye 300 Nano /APIO 300N相關信息請聯系我們。
其他檢測儀器：高溫耦合劑、鐵素體含量檢測儀。
